Start End Codes

Start Code: Start Code:M104 S[first_layer_temperature] ; set extruder tempM140 S[first_layer_bed_temperature] ; set bed tempM190 S[first_layer_bed_temperature] ; wait for bed tempM109 S[first_layer_temperature] ; wait for extruder tempG28 ; home all axesG92 E0G1 F6000 X0 Y0 Z0.3 E10G92 E0G1 F6000 End Code: M104 S0M140 S0;Retract the filamentG92 E5G1 F300 E-5G1 F6000 X190 Read more…

Parts – Print Settings

Slicer Recommendations Material: Filamentum CPE or some PETG is recommended Walls: 2.0 mm Shell Bottom/Top: 2.0 mm shell at 0.2-0.25 layer height For the 30/1 wormgear the magical layer numbers are 0.125 and 0.250 Infill: 20% – 100% You do need a good calibrated extruder as parts are tight so Read more…